PS Audio BHK Signature Preamplifier Instructions For Use Manual Download | Manualshive

Page: 13 / 22

background image

4826 Sterling Drive, Boulder, CO 80301

Getting Started

PH: 720.406.8946 [email protected] www.psaudio.com

15-071-01-1

Rev A

Getting Started

©2016 PS Audio Inc. All rights reserved.

®

Owner’s Reference

BHK Signature Preamplifier

VERSION NUMBER

The BHK Preamplifier is 100% analog in its signal path. Control and display functions are handled
by a microprocessor operating on the display board. The microprocessor runs the display, responds
to the volume control and the remote control. No digital processing of any kind occurs in the BHK
Preamplifier signal path. Think of the microprocessor as taking care of the housecleaning chores.

The microprocessor runs on software. Unlike our DirectStream DAC, which also uses software, no
change in sound quality of the BHK Preamplifier will ever be affected by a change in software, since it
is never related to the signal path in any way. The display will show the Version of software installed.
Changes to the software would be rare. Once in the setup menu, the version is displayed.

Control Software

8

«
...
11
12
13
14
15
...
»

Summary of Contents for BHK Signature Preamplifier























Reviews:

No comments

Related manuals for BHK Signature Preamplifier

Brand: NAD Pages: 8

Brand: Parasound Pages: 16

Brand: EAW Pages: 12

Brand: AAVIK Pages: 8

Brand: Ecler Pages: 20

Brand: Ecleree Pages: 28

Brand: Ecleree Pages: 42

Brand: Icom Pages: 13

Brand: Yamaha Pages: 84

Brand: Octave Pages: 28

Brand: Octave Pages: 31

Brand: Octave Pages: 36

Brand: Octave Pages: 38

Brand: PS Audio Pages: 28

Brand: Rogue Audio Pages: 12

Brand: Altimium Pages: 36

Brand: Earthworks Pages: 2

Brand: Luxman Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands