8
6
5
Using the PRYMEBLU Speaker Microphone
7
STATUS LED MESSAGES
The meanings of the various status LED messages shown by the PRYMEBLU PTT are shown
on the following table:
Continued from page 4
• Continue to hold the Talk button on the adapter down for approximately three seconds. Release
the Talk button when the status LED on the PRYMEBLU Radio Adapter begins to flash two times
per second. The PRYMEBLU Radio Adapter is now in audio accessory pairing mode.
• Hold down the Multifunction Button on the PRYMEBLU Speaker Microphone. Continue to hold the
button down for approximately 3 seconds, until you see the LED on the speaker microphone begin
to quickly flash RED-BLUE-RED-BLUE in sequence. The PRYMEBLU Speaker Microphone is now in
pairing mode.
• After a few seconds, the two devices should synch to one another. Once the PRYMEBLU
Speaker Microphone and Adapter are paired with each other, the status LED on the adapter will
show a constant blue light for three seconds. The LEDs on both the adapter and speaker
microphone will then show one FLASH every few seconds.
• If the PRYMEBLU Radio Adapter does not detect the speaker microphone within 60 seconds of
being put into pairing mode, the adapter will exit the pairing mode and resume normal
operation.
• Once successfully paired, you will be able to operate your 2-way radio using the PRYMEBLU
Speaker Mic.
Reconnecting a Previously Speaker Microphone and Radio Adapter
Once the PRYMEBLU Speaker Microphone and Radio Adapter have been successfully paired
together, both devices will remember that connection. The adapter and speaker mic will attempt
to reestablish their link whenever the radio/adapter and microphone are both powered on and
in within range of each other. Re-establishing this connection can take 10-60 seconds.
OPTIONAL EAPRHONES
Although the PRYMEBLU Speaker
Microphone has a built-in speaker
for listening to received calls, some
users may prefer to use a listen only
earphone for enhanced privacy.
The accessory jack on the speaker
microphone will accept any mono
earphone with a 3.5 mm audio plug.
When an earphone is used, the
front-firing speaker is disabled.
PRYME EH-1389SC model shown.
Earphone sold separately.
PRYME makes a variety of listen-only earphones in different styles that
will work with the BTH-SPM100.
SPECIFICATIONS
Once your PRYMEBLU Speaker Microphone and PRYMEBLU Adapter have been paired
together:
Received signals will be heard over your PRYMEBLU Speaker Microphone’s front-firing
speaker or through the optional earphone. The volume of received calls can be adjusted
using the volume control on the two-way radio.
When transmitting or on a phone call, the operator’s voice is picked-up by the microphone in
the PRYMEBLU Speaker Microphone.
Push-to-Talk can be activated one of several different ways:
• By pressing and holding the PTT button on the PRYMEBLU Speaker Microphone.
• By pressing and holding the Talk button on the PRYMEBLU Adapter.
• Using an optional wired PTT that is plugged into the PRYMEBLU Adapter.
• Using an optional PRYMEBLU Wireless Bluetooth PTT (model BT-PTT, sold separately). Note
that if you are using a PRYMEBLU BT-PTT, you will first need to pair the adapter with the PTT
using the instructions located in the PRYMEBLU PTT User’s Guide.
LED INDICATION
Constant Red (while plugged into charger)
Constant Green (while plugged into charger)
Flashes red-blue-red-blue repeatedly
Two blue flashes every two seconds
One blue flash every two seconds
Constant red with one blue flash every two seconds
No indication
MEANING
Charge mode
Charging is finished
Pairing mode
Adapter is powered on but not paired
Adapter is powered and paired
PTT is pressed
Device is powered off
Model
Earphone Style
Cable Length/Type Connector
EH-389SC
Rubber Ear Hook
15” Coiled
3.5 mm right-angle
EH-389XC
Rubber Ear Hook
25” Coiled
3.5 mm right-angle
EH-1289SC
Plas
ti
c D-Ring
15” Coiled
3.5 mm right-angle
EH-1289XC
Plas
ti
c D-Ring
25” Coiled
3.5 mm right-angle
EH-1389SC
Acous
ti
c Tube
15” Coiled
3.5 mm right-angle
EH-1389X
Acous
ti
c Tube
30” Straight
3.5 mm right-angle
EH-1399X
Acous
ti
c Tube
30” Straight
3.5 mm straight
Bluetooth Version:
v2.1+EDR
Speaker Output:
1 wa
tt
Maximum Audio Level:
126 dB
Receiver Sensi
ti
vity:
-82 dBm (typ.)
Power Class:
Bluetooth class 2
Range:
10 meters
Display:
Blue, Red, and Green
Bluetooth Pro
fi
le:
HFP,HSP,SPP Pro
fi
le
Opera
ti
ng Voltage:
5 VDC
Ba
tt
ery Capacity:
240 mAH
Opera
ti
ng Time (Standby)
> 50 hours
Opera
ti
ng Time (Typical)
> 11 hours
Opera
ti
ng Time (Con
ti
nuous Talk) > 5 hours
Push-to-Talk Func
ti
on:
Built-in
Opera
ti
ng Temperature:
-70°F to +120°F (approx.)
Weight:
60 grams (approx.)
SUPPORT AND WARRANTY
PRYME Radio Products warrants this product against defects in materials or workmanship
for a period of one year from the date of retail purchase. PRYME will repair or replace a
defective unit, at our option, without charge for parts or labor. The limited warranty is
extended only to the original purchaser and is valid only to consumers in the United States
and Canada. It does not cover damage or failure caused by or attributable to Acts of God,
abuse, misuse, improper or abnormal usage, faulty installation, improper maintenance,
lightning, or other incidences of excessive voltage, or any tampering or repairs by other
than a PRYME authorized repair facility. It does not cover replacement of consumable
parts, transportation costs, or damage in transit.
Repair or replacement under the terms of this warranty does not extend the terms of this
warranty. This warranty can only be modified by an officer of PRYME Radio Products, and
then only in writing. Should this product prove defective in workmanship or material, the
consumer’s sole remedies shall be such repair or replacement as provided by the terms of
this warranty. Under no circumstances shall PRYME Radio Products be liable for any loss or
damage, direct, consequential, or incidental, arising out of the use of or inability to use this
product. Some states do not allow limitations on how long an implied warranty lasts or the
exclusions or limitations of incidental or consequential damages, so the above limitations
or exclusions may not apply to you. This warranty gives you specific legal rights. You may
also have other rights, which may vary, from state to state.
For support or warranty service on your PRYME product, contact us at 1-800-666-2654 or
visit us on the web at www.PRYME.com.
COPYRIGHT AND TRADEMARK INFO
© 2013 PRYME Radio Products, Brea CA. All rights reserved.
PRYME® and PRYMEBLU® are trademarks owned by PRYME Radio Products. All other
product or service names are the property of their respective owners.
DISCLAIMER:
The Bluetooth wireless link used by PRYMEBLU products is an open
standard, unsecured technology. As such, it is not recommended for first-responder or
other mission critical users.
