PRx Performance GR130 User Manual Download Page 3

3

To reduce the risk of serious injury, read all important precaustions and instructions in this manual and all warnings 

on the rack before using the weight rack. GRIND assumes no responsibility for personal injury or property 

damage sustained by or through the use of this product.

1.  It is the responsibility of the owner to ensure that all users of 

the weight rack are adequately informed of all precautions.
2.  Before beginning any exercise program, consult your 

physician. This is especially important for persons over age 35 or 

persons with pre-existing health problems.
3.  The weight rack is not intended for use by persons with 

reduced physical sensory, or mental capabilities or lack of 

experience and knowledge, unless they are given supervision or 

instruction about use of the weight rack by someone responsible 

for their safety.
4.  Use the weight rack only as described in this manual.
5.  The weight rack is intended for home use only. Do not use the 

weight rack in any commercial, rental, or institutional setting.
6.  Keep the weight rack away from moisture and dust. Do not 

put the weight rack in a covered patio or near water.
7.  Place the weight rack on a level surface, with enough 

clearance around the weight rack to mount, dismount, and use 

the weight rack. To protect the floor or carpet from damage, place 

a mat under the weight rack.
8.  Using the four anchor holes to provide maximum stability, 

the weight rack must be anchored to the floor where required or 

whenever possible.

9.  Inspect and properly tighten all parts each time the weight 

rack is used. Replace any worn parts immediately.
10.  Keep children under age 13 and pets away from the weight 

rack at all times.
11.  Keep hands and feet away from moving parts.
12.  Wear appropriate clothes while exercising: do not wear loose 

clothes that could become caught on the weight rack. Always 

wear athletic shoes for foot protection while using the weight 

rack.
13.  The weight rack is designed to support a maximum user 

weight of 300 lbs. (136kg), and a maximum total weight of 610 

lbs. (277kg). The pull-up bar is designed to support a maximum 

user weight of 300 lbs. (136kg). Note: The weight rack does not 

include weights or a barbell.
14.  Always place both weight rests at the same height and 

both spotters at the same height. Make sure that there are at 

least three adjustment holes between the weight rests and the 

spotters.
15.  Over exercising may result in serious injury or death. If you 

feel faint, if you become short of breath, or if you experience pain 

while exercising, stop immediately and cool down.

IMPORTANT PRECAUTIONS

Summary of Contents for GR130



















Reviews: