© 2017 PRUVEEO All Rights Reserved.
18
Charging the battery
Charge the device by connecting the camera via the USB car charger port. Use only
Pruveeo-approved chargers. Using unapproved chargers or cables can damage the device
or cause the battery to explode.
Connect the car charger’s jack to the USB charging port, and then plug the charger into
the car cigarette lighter or 12V DC power outlet.
•
Battery is mainly used to save files in emergency. Please always connect dash cam to
external power while it is in use.
•
When device detects no power supply, it will automatically power off after 5 seconds.
To turn on the device again, you will need to do so manually by pressing the
ON /
OFF button.
•
If the battery is completely discharged, the device will not turn on immediately when
the charger is connected. Allow a depleted battery to charge for a few minutes before
attempting to turn on the device.
•
The device can be used while it is charging, although it may take longer to fully
charge the battery.
•
If the device receives an unstable power supply while charging, the screen may not
function properly. If this happens, unplug the charger from the device.
•
While charging, the device may heat up. This is normal and should not affect the
device’s performance or lifespan.
•
If the device is not charging properly, take the device and the charger to an
authorized Pruveeo Service Center.
Connecting the charger improperly may cause serious damage to the device. Any damage
caused by misuse is not covered by the warranty.
