properly. No need to apply this lubricant during the first assembly of the kit, all parts
are greased by the manufacturer.
-
Tools and Spare parts
- Includes needle-nose pliers, a Phillips screwdriver, Allen
keys and a package of the small spare parts (fasteners, magnets, PTFE tube).
-
IPA pads
- Several IPA pads to clean your print sheet.
-
Test protocol
- All the components of every printer are tested. The electronic parts
are connected (as in a final assembly) and a battery of tests is run. The serial
number stickers and the test protocol are printed only when the components pass all
of the tests. The test protocol lists all the test results.
6.2 Printer assembly
For the Original Prusa i3 MK3S+ printer kit, we suggest following the guidelines and
assembling the kit according to the online manual at
. (The online
manual is available in several languages on the website). The construction of the
printer should not take more than one working day. After successful completion,
continue to chapter
.
6.3 Setup before printing
● Place the printer in a horizontally stable position; the best place is a workbench
where there is no risk of a draft.
● Attach the filament holders to the upper frame.
● Attach a spool of
Filament
to the holders. Make sure the filament spool doesn’t jam
and can move freely.
● Plug in the AC power cord and turn on the switch.
● Check out the firmware version (in the Support menu via LCD panel) and please
upgrade to the latest one from our website
.
Filament
is a common term for the
plastic rod
- material provided on a spool from
which 3D objects are printed.
11
