PRT MPT-III Series, User Manual

Page: 9 / 9

3.3.3 Bluetooth
Hand terminal, notebook and other intelligence terminal drive to printer through Bluetooth.
Methods:
1.
Add Bluetooth device through click Bluetooth icon with your mouse right button on
Bluetooth control panel.
2.
Find new device MPT-III .
3.
Click
‘next’ and enter your password ‘
0000
’ , then finish.
4.
The system will display interface added, one interface is output interface, the other
input interface.
3.4 LED indicator and buzzer definition
There are one buzzer and two LED indicators to indicate the status. LED indicators
indicate current status and buzzer indicates the changes of status.
LED indicator
（
blue
）
LED indicator (red
）
Status Buzzer
Flash quickly Dark Charging
Flash slowly Dark Insufficient power
Continuously bright Dark Charging end
Dark Bright continuously Standby
Flash slowly Flash slowly Paper end Warning
Dark Flash slowly Rest
Chapter 4 Other information
4.1 Technical manual (Please refer to MPT Series Technical Manual)
4.2 Black mark
If user wants to locate receipt by detecting mark preprinted, testing mark should meet the
testing print regulation. Otherwise it may cause printer can
’t recognize the detecting mark.
Width rang
：≥
7mm
Height
：
4mm
≤
height
≤
6mm
Reflection rate to IR
：
<10%
（
reflection rate to the black mark on paper >65%
）
Hps
：
Hps indicates the distance from down edge of detecting mark from beginning line.
0mm
≤
Hps
≤
1mm