9
Charging instructions
TROUBLESHOOTING
Some issues that arise may be solved by the user. If the problem persists after having tried
the following solutions, please contact Prozis customer service.
PROBLEM
CAUSE
SOLUTION
No response from the drone
The drone’s battery is low
Charge the Drone
Low battery controller
Replace the batteries
Incorrect frequency
Make sure the drone and the transmitter are on
the same frequency. Please check “Gesture remote
controller calibration”.
Slow to respond or difficult to
maneuver.
Low battery controller
Replace the batteries
Interference from another R/C vehicle
nearby
Make sure the drone and the transmitter are on
the same frequency. Please check “Gesture remote
controller calibration”.
The rotors spin but the drone
cannot lift off.
Check the rotor blades for damage. Bent or
broken blades can be replaced easily with the
spare blades included in the package. Simply pull
out the damaged blades from their location on the
motor shaft and replace them with new ones.
The drone flies sideways on
its own.
Check for trapped dirt around the rotors. Just a
little strand of hair can cause the drone to fly out
of control.
EN
2
3
1
Front
BLADE B
Power Switch
BLADE A
BLADE A
BLADE B
Back
