EN
8
• Select Prozis Airia and wait until the soundpods are listed as connected in the BT settings of
your smartphone. Enter
0000
if a PIN code is requested.
• Once the connection has been established, you will hear
BT Connected
.
• If the connection attempt takes longer than 3 minutes to complete, the soundpods will
switch off automatically.
Pairing with computer or other devices
• You should use a BT adapter if your computer does not support a BT connection.
• Plug the BT adapter into the computer’s USB port and make sure the BT function of the
adapter is activated.
• Make sure the soundpods are off before initiating pairing mode.
• Press and hold both multi-function buttons for about 4 seconds. The soundpods will search
for a BT connection.
• Open the BT software installed in your computer and select “Search for BT devices” (check
the BT software user manual if needed) and wait until Prozis Airia appears in the list of BT
devices found.
• Select Prozis Airia and wait until the soundpods are listed as connected in your computer’s
BT settings. The LED indicator light will flash red/green automatically.
• Switch on the media player to play music, watch TV or movies, or play games.
Subsequent pairing
The soundpods switch on automatically when you take them out from the charging case, or
you can also switch them on manually by pressing and holding both of the multi-function
buttons for 2 seconds.
After 20 seconds, the soundpods will automatically start pairing with the last paired device.
Clear the paired device list stored in the soundpods
• Place the soundpods inside the case.
• Short press both multifunction buttons simultaneously and then press and hold them until
the indicator light flashes yellow.
• The indicator light will then change to red automatically, indicating the list of paired
devices has been cleared.
PHONE CALL FUNCTIONS
Answering a call
A beeping sound is played when receiving a call. To answer an incoming call, press the
multi-function button once. You can use the soundpods as speakerphones.
Rejecting a call
To reject a call, press and hold the multi-function button for about 2 seconds. An audio sound
is played when you reject a call.
Ending a call
To end a call, press the multi-function button once.
