Translation of the Original Operating
Instructions MICRO Profiling device
MP 400
Dear Customer,
The use of these instructions
• makes it easier to become acquainted with the
device,
• prevents malfunctions due to improper han-
dling, and
• increases the service life of your device.
Always keep these instructions close to hand.
Only operate this device with exact knowledge
of it and comply with the instructions.
PROXXON will not be liable for the safe function
of the device for:
• handling that does not comply with the usual
intended use,
• other application uses that are not stated in the
instructions,
• disregard of the safety regulations,
You will not have any warranty claims for:
• operating errors,
• lack of maintenance.
For your safety, please comply with the safety
regulations without fail.
Only use original PROXXON spare parts. All
rights reserved for further developments in the
course of technical progress. We wish you much
success with the device.
Safety regulations:
Wear personal protective equipment and al-
ways wear protective goggles.
Depending on the type and use of the electrical
device, wear personal protective equipment
such as a dust mask, non-slip safety shoes, a
helmet or hearing protection to reduce the risk of
injuries. Wear a breathing mask if the work you
do generates dust.
If dust extractors and collectors can be in-
stalled, then ensure that these are connected
and used correctly.
The use of these devices reduces the hazards
that dust poses.
General view (fig. 1):
1. Housing
2. Table
3. Limit stop
4. Hand wheel for profiling height adjustment
5. On-off switch
6. Locking screw for limit stop
7. Guard
8. Locking screw for tool protection
9. Profiler
10. Fastening bores
11. Suction connection
12. Spanner holder
13. Angle stop
14. Mains cable
Description of the machine:
For profiling, slotting, chamfering, trimming, sep-
arating, etc. Your MP 400 enables, e.g., precise
machining of sides and long sections such as for
doors, flaps and housing parts.
The profiling tool is height-adjustable:
On a dovetail guide, the carriage with the drive
unit can be set precisely with the help of the
scaled hand wheel (one revolution is a 1 mm
height difference, i.e., one scale graduation line
is 0.05 mm). While working, this helps you to
slowly and very accurately “feel” your way to-
wards the required profile depth as needed. The
spindle is manufactured precisely and has a
double ball bearing.
The see-through guard can be adjusted in
height, thus making it possible to adjust it to the
work piece thickness; it also functions as a hold-
down.
Additional flexibility is offered by an angle stop
and a longitudinal stop. This can be used on ei-
ther side of the profiling tool on the work table.
This makes it possible to machine a large width
area of the work piece. Also ideal for broader
strips or boards.
- 10 -
