Proxxon MBS 240 / E, User Manual

Page: 14 / 80

- 14 -
Extension cables in the open air.
1. In the open air always use extension cables
which are authorized for the purpose and which
are correspondingly marked.
Always be attentive.
1. Be aware of what you are doing. Carry out your
work sensibly. Do not use the tool if you are
tired.
Check the tool for damage.
1. Before further use of the tool, examine protec-
tive devices or slightly-damaged parts to ensure
that the function is perfect and meets the
requirements.
2. Check that the moving parts function perfectly
and do not stick and that parts are not dam-
aged. All parts must be correctly mounted and
all the conditions fulfilled to ensure trouble-free
tool operation.
3. Damaged protective equipment and parts must
be properly repaired or exchanged by an
authorized specialist workshop if no other infor-
mation is given in the instructions for use.
4. Arrange for damaged switches to be exchanged
by a customer services workshop.
5. Never use tools on which the switch cannot be
switched on and off.
WARNING!
1. The use of other tool inserts and accessories
can present a risk of injury.
Arrange for your tool to be repaired by a spe-
cialist electrician
1. This tool meets the relevant safety regulations.
Repairs may only be carried out by electrical
specialists and original spare parts must be
used. Otherwise accidents can happen to the
user.
3. Wear a hair net if you have long hair.
Use the protective equipment.
1. Wear safety glasses.
2. Wear a breathing mask when carrying out dust-
generating work.
Connect to the dust extraction equipment.
1. If connections are available to dust extraction
and collection equipment, make sure that they
are properly connected and used.
Do not use the cable for purposes for which it
was not designed.
1. Do not use the cable to pull the plug out of its
socket. Protect the cable from heat, oil and
sharp edges.
Secure the tool.
1. Use the clamping fixture or a vice to hold the
tool tightly. It is thus held more safely than with
your hand.
Avoid abnormal postures.
1. Ensure that you are standing safely and always
maintain your balance.
Take great care of your tools.
1. Keep the tools sharp and clean so as to be able
to work better and safer.
2. Follow the maintenance instructions and the
advice about tool changing.
3. Regularly check the tool cable and have it
replaced by an authorized specialist if it is dam-
aged.
4. Regularly check the extension cables and
replace them if they are damaged.
5. Keep handles dry and free from oil and grease.
Pull the plug out of the socket:
1. When the tool is not in use, before maintenance
and when changing tools such as the saw
blade, drill or milling cutters, always take the
plug out of the socket.
Do not leave any tool spanners or setting keys
in place.
1. Before switching on always check that span-
ners, keys and setting tools have been
removed.
Avoid unintentional starting.
1. Always make sure that the switch is in the OFF
position when you plug the tool into the socket.