Proximus P16-40922, User Manual

Page: 18 / 31

19
USB Monitor User Guide
Driver Program Installation (For Windows OS)
4. Linearization
Linearization ( 25 or 9 points calibration ) function
is used to compensate the touchscreen linearity.
After linearization completed, the linearity of the
touchscreen will be shown in the Linearity curve
window.
Pressing this button, a new window will be popped
-up at the location when the touchscreen was
mapped to area for this touch system to guide
the user do 25 points calibration. User should follows
the guide to touch and hold the blinking X symbol
in the calibration window until it does not blink
to make sure that the utility can gather enough data for computation. In addition, a time line bar
is shown in the bottom of the window to indicate time elapsed. If the touchscreen was not touched
before the time line bar going to right end, the calibration task will be terminated automatically.
5. Draw Test
This function is used for accuracy and performance
check. Press this button and a new pop up window
will be popped up in the location where the
touchscreen was mapped to the touch system
as below,
Ɣ
User can press the Clear button to clear the window.
Press Quit button to terminate this draw test.
Ɣ
TouchSide software package contains an utility to monitor some events related
to touchscreen application. After TouchSide software package installed, a tray
icon utility was shown in the system task bar as below. Whenever the mouse
cursor moves on the tray icon, a tool tip shows as
Ɣ
This is a fast tool for user to change some driver setting without
launching the TouchSide configuration utility. When user right
click on this tray icon, a pop up context menu shows as below,
Ɣ
This pop up menu shows the all of the functions this utility supports.
xTouchmon utility
䕔
Configuration Touchside Utility