23
Base settings
Set the base to registration mode
Using this function you can add GAP compatible
handsets to your base. The handset that you want to pair
with your base must itself be in pair mode. Consult the
user booklet of your handset to find out what to do.
•
Go to
SETTINGS
/
ADVANCED SET.
/
SET BASE
/
REGISTR. MODE
.
•
Press
Valid.
.
•
REGISTR. MODE?
is displayed on the screen,
press
Yes
.
•
Indicator on the top of the '1' key starts to flash rapidly.
Your base will remain in registration mode for about 1
minute.
Pairing Maestro 60 handsets with the Maestro 60
base:
•
Indicator on the top of the '1' key starts to flash rapidly.
Your base will remain in registration mode for about 1
minute.
•
To set your base to pairing mode, proceed as
described above or press the key, until the indicator
above the ’1’ key winks.
•
Hold down the call control button, situated under the
handset, until the handset is registered.
Resetting the base
When you reset your base, all the base parameters are
reset to their initial values (factory settings).
•
Go to
SETTINGS
/
ADVANCED SET.
/
SET BASE
/
RESET BASE
.
•
Press
Valid.
.
•
RESET BASE?
is displayed on the screen.
•
Press
Yes
.
•
Enter the base code (0000 by default).
•
Press
Valid.
.
The "
RE-INIT. IN PROCESS
" and the
OK
messages
are displayed successively.
Your base is now reset.
You can save up to 5 GAP-compatible
handsets on your Maestro 60 base.
You can also set the base to pairing mode
by holding down your base's
key.
After telephone reinitialisation, you have
to electrically unplug then plug the base in
order to finalize the factory reset process.
