Proximus Forum Phone 516 User Manual Download

Page: 23 / 156

Display and MenuCards

Forum Phone 516/526/536 System Telephones

Labelling a key

The keys can also be labelled in the

Configurator

of the Web console (in the

Telephony > Devices > System phones

menu). If the key labelling is changed

in the above mentioned manner or on the key extension, the new text will also
be displayed in the Configurator. Conversely, the modified texts will overwrite
the display texts on the telephone or key extension.

Information regarding the aforementioned key extensions can be found in the
chapter

Key Extensions

starting on page 29.

Display and MenuCards

Changing the Language

Use the following procedure to set the display language:

In the Main menu you can use the

4 Phone settings

MenuCard to change the

language (see page 118).

Press the key (

long key press

), then …

select

Modify text

Press the OK key.

In the following MenuCard under

Text:

enter the text (see

also the chapter

Entering Text

starting on page 27).

O O

Press the OK key twice.

Press the ABC key (long key press).

Using the arrow key scroll to the desired setting.

Confirm the setting with the OK key.

Summary of Contents for Forum Phone 516





























































































































































Search results

Summary of Contents for Forum Phone 516

Reviews:

Related manuals for Forum Phone 516

Brands by name

Popular brands

Proximus Forum Phone 516, User Manual

Search results

Summary of Contents for Forum Phone 516

Reviews:

Related manuals for Forum Phone 516

Brands by name

Popular brands