manualshive.com logo in svg

Proximus forum 523, Mounting And Commissioning Manual

Share
Download
Proximus forum 523 Mounting And Commissioning Manual Download Page 107

SIP Telephony

Voice over IP (VoIP)

105

●

The “REGISTER” SIP message must be sent to the IP address of the 
Forum 523/524 using the 5060 destination port. For SIP subscribers, this 
setting is frequently located under “SIP Server” or “SIP Settings” with the 
terms “Domain”, “Server IP” and “Server Port”.

●

The “REGISTER” SIP message must contain a valid user name and the 
appropriate password (the 

User name

 and 

Password

 fields in the 

Confi-

gurator

 under 

User Manager

: 

User

). For SIP subscribers, this setting is 

frequently located under “SIP User Settings” or “SIP Account” with the 
terms “Authorization User” and “Password”.

●

The “REGISTER” SIP message also contains a SIP-URI in the spelling for e-
mail addresses, for example 

"Displayname" <sip:[email protected]>

. The text portion of the 

SIP-URI (“Display Name”) is not evaluated at log-on from the Forum 523/
524. The series of characters before “@” is the “User Name” or “SIP 
Username”. The internal call number of the user must always be used here 
(the 

Ph.No. 

field in the 

Configurator

 under 

User Manager

: 

User

). The 

series of characters after “@” is the “Domain Name” or the “SIP Domain”. 
The IP address of the Forum 523/524 must always be used here.

●

A STUN server (Simple Traversal of UDP over NAT) or a SIP proxy is not 
required because internal SIP subscribers on the LAN are directly 
connected to the Forum 523/524. Switch these functions off if possible.

●

With a SIP terminal, you can enter an international phone number with a 
leading plus. When you enter a call number in the E.123 format, the plus 
char is substituted by the “00” number sequence and the immediate line 
seizure via the standard route is activated for the call. If you prefer to dial in 
this number format, you should activate the international call number 
conversion (see 

E.164 conversion

 starting on page 145).

Features

SIP subscribers can establish connections to all other terminals and trunks. 
The SIP protocol generally works with block dialling. This is why the selected 
call number is only activated after an internal clock has expired or activated 
immediately via the hash key (“#”) when dialling. This is why code number 
procedures without the hash key and code number procedures with a 
concluding hash key can be used. An overview of code number procedures 
that can be used is located in the Configurator on the 

System Info

: 

Codes 

page

.

 Activate “SIP phones”. Please also note the corresponding information 

in the “Forum 500 / Forum 5000 – Standard Terminals” user guide.

Summary of Contents for forum 523





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands