E.164 conversion
Telephony
145
Telephony
E.164 conversion
The Forum 523/524 communications system supports two different types of
call numbers when dialling external call numbers. Usually you enter the code
for a route, e. g. a “0” for the “external line” route. Then you enter an external
call number. The external call number can be either a local area code or a
country area code.
The additionally configurable “E.164 conversion” feature enables you to enter
the entire international call number. Using the international call number
makes sense in the following applications:
●
When dialling via a computer programme connected with TAPI where call
numbers are often already in the international format due to synchroni-
sation with a mobile telephone.
●
When importing or comparing directory data when directory entries are in
the international format.
●
When networking communications systems with locations in different
local areas or in different countries.
The “E.164 conversion” analyses an international call number. The analysis
divides the call number into multiple parts: the international area code, the
local area code, the access call number and if necessary the extension. The
call number is respectively abbreviated, eliminating any unnecessary area
codes. The abbreviated call number is then used, e. g. to execute a call.
Configuration
You can configure the “E.164 conversion” feature for each bundle separately.
This is possible for point-to-point configured bundles (“system access with
DSS1”), for point-to-multi-point configuration (“multi-terminal access”) and
for SIP trunks:
1.
Call the Forum 523/524 communications system
Configurator
. On the
introductory page, change the
Level
option to
Expert
.
2.
This step is optional as the country code is preallocated due to the
Country
setting under
System
:
Common
.
Summary of Contents for forum 523
Page 1: ...Forum 523 524 Mounting and Commissioning Manual ...
Page 10: ...8 ...
