Proximus 5025 User Manual Download Page 67

Page: 67 / 216

Key Functions

Feature Overview

Information for the system administrator

●

You configure the internal call number of a SIP system telephone in the

Configurator > Telephony > Devices > VoIP phones

menu. The internal

call number that you enter there will be assigned to the trunk key 1 of the
telephone.

●

The assignment of external call numbers is done in the

Configurator >

Telephony > Call distribution

menu.

Programmable Keys

The SIP system telephones provide a number of free programmable keys.

Each programmable key can be programmed as a further trunk key
(exception: Forum IPhone 5010) or as destination key, direct-call key or
feature key. The number of programmable keys depends on the telephone
model:

You have seized the key.

The LED of the keys L1 or L2 lights up
(softkey display for an additional
trunk key on the
Forum IPhone 5025/5030/5040:

)

You have put a subscriber on hold.

The LED of the keys L1 or L2 flashes
(softkey display for an additional
trunk key on the
Forum IPhone 5025/5030/5040:

)

Telephone

Programmable keys

Forum IPhone 5010

3 without LED, below the display

Forum IPhone 5020

8 with LED, on top of the display

Forum IPhone 5025

●

5 TopSoftkeys with LED, next to the display,
programmable in 4 levels,

sum: 20 TopSoftkeys

●

3 Softkeys without LED, below the display,
programmable in 6 levels,

sum: 18 Softkeys

Summary of Contents for 5025

























































































































































































































Search results

Summary of Contents for 5025

Reviews:

Related manuals for 5025

Brands by name

Popular brands

Proximus 5025, User Manual

Search results

Summary of Contents for 5025

Reviews:

Related manuals for 5025

Brands by name

Popular brands