Proximus 5025 User Manual Download Page 127

Page: 127 / 216

Status Menus

Telephoning

125

“Conversation” Status Menu

You are in a phone call and you

have not

dialled an internal enquiry call. Press

the programmed

Menu >>>

key, then select one of the following menu

entries.

Park call

: You park the call. To do so, enter the

Park-ID

. The system offers the

next available parking spot (0-9, * or #). For more information please refer to
the chapter

Parking Calls

on page 145.

Hold

: The subscriber is put on hold.

Door opener

: This activates the door opener.

Call recording

: You start a call recording session. You will only see this menu

entry if the system administrator has enabled the function “Call recording” for
you (see the chapter

Call Recording

on page 153).

Disconnect

: This disconnects the current connection.

Intercept

: The call numbers of “malicious callers” can be saved in your

network operator’s exchange (if this service is enabled). The function is also
possible if the caller has already hung up!

“Calling...” Status Menu

You have dialled a call number, but the called subscriber has not yet accepted
the call. Press the programmed

Menu >>>

key, then select the following

menu entry.

Disconnect

: This disconnects the current connection.

“Busy” Status Menu

You have dialled a call number, the called subscriber is busy. Press the
programmed

Menu >>>

key, then select one of the following menu entries.

Callback

: You leave your call-back request with a busy internal subscriber

(not possible for hunt group numbers).

VIP call

*: Your call is acoustically signalled to called internal busy subscribers,

even if they have activated their call waiting protection, call protection or call
forwarding (only possible on system terminals).

(*: Not possible if there are already two active calls.)

Summary of Contents for 5025

























































































































































































































Search results

Summary of Contents for 5025

Reviews:

Related manuals for 5025

Brands by name

Popular brands

Proximus 5025, User Manual

Search results

Summary of Contents for 5025

Reviews:

Related manuals for 5025

Brands by name

Popular brands