Proximity
UVC-CM
SET-UP
REV H /2021
P3
Plug In Power.
Step 6:
Two sided adhesive is preinstalled.
Remove the adhesive paper.
Step 4:
Plug In Power
Step 8:
(supplied adapter
or a USB 3.0.)
Step 5:
Step 7:
Push the adhesive in place.
Tighten the clamp screw until
fi
rm.
Power is on.
Install 2 screws, until
GJ
rm.
One short, and one long.
Step 1:
Step 2:
Install the second portion of the clamp bracket.*
Up, and then slide to back.
Step 3:
Install the
fi
rst portion of the clamp bracket.
*It will be loose until
all assembly complete
at Step 7.*
Install 2 supplied,
Long, screws.
Locate clamping screws. Do not thread completely so you may clamp
the intended mounting surface.
Long
Short
0 degrees
15 degrees
(FLAT SQUARE)
This part will minimize
free rotation.
