ESC When menu mode is selected, ESC (escape) will be displayed.
Any of the up or down buttons will move on to the next menu option.
Pressing enter will return to play mode. ESC can be used as a mute
control. Pressing the menu button will leave play mode, muting the
Proximitar. Pressing enter will return to play mode.
2d
3d
The 2d and 3d menus are used to load palettes and
spheres. The two menus are organized in the same way. Pressing
enter will move to folder select. The folder number will appear 2d1-
2d9. Any of the up or down buttons can be used to select the desired
folder. Pressing enter will move to palette/sphere select 000-999.
Each set of up/down buttons corresponds to the digit above. After
selecting the desired palette/sphere, press enter to load. The name
will appear in the Base Station display. If a diferent choice is desired,
select a new number and press enter again. This new selection will
appear in the Base Station display. This feature can be used to scan
through the fles on the SD card. Once the desired palette/sphere is
loaded, press ESC to return to play mode.
OFF
Pressing enter will shut down Sensor Core.
SET
Settings contains a sub menu with the following 8 controls:
SN
SCR
AOD
RST
TCH
TRG
CH
TRN
Transpose is used to shift a palette up or down by the selected
number of half steps. The “-” sign shifts down, no “-” sign shifts up.
Transpose is automatically reset to zero when a palette is loaded, so
palette must be loaded prior to the shift. Range -18 to +18. Palettes
can be permanently transposed using the online Palette Editor app.
Trigger controls the intensity of the infrared trigger sensors.
Use this to set trigger distance and to compensate for variations in
skin color. Changes are saved on shut down. Range 000-127.
Touch Sensitivity controls the the amount of variation between
hitting the trigger hard or softly. Zero means no diference, 5 the
largest diference. Changes are saved on shut down.
Channel sets the radio transmission channel. The Base Station
must be set to the same number. Range 000-999. Changes are saved
on shut down.
Reset will return all settings to factory defaults. Make sure Base
Station is on same radio channel after reset.
Turns the scrolling menus on or of. Changes are saved.
Sets the Auto Of Delay time. Range 0 (disabled) to 18
minutes. Changes are saved on shut down.
Displays serial number.
11
