P ro x i m a R F D e s k t o p
H F R F I D R e a d e r
201 - 6272 East Boulevard
Vancouver, BC Canada, V6M 3V7
T: +1 604 263 5529 ext. 4
F: +1 604 263 9925
www.applied-rfid.com
Installation
1. Installation
1.1 Connect the Proxima RF Desktop to your computer using the provided USB cable.
1.2 Your computer will recognize the Proxima RF Desktop and will install the appropriate
drivers automatically.
(If requested let your computer connect to the internet to search and download the appropriate
drivers)
NOTE: In case your computer cannot install the appropriate
drivers automatically you may download them from the FTDI
website:
http://www.ftdichip.com/Drivers/VCP.htm
1.3 The Proxima RF Desktop is now ready to use.
Your computer will recognize the reader as a USB Serial
Port. You can verify this by navigating to: “Start->Control
Panel->System->Hardware->Device Manager”. Note that
there is a new entry under Ports called “USB Serial Port
(COMX)”, where “COMX” refers to the virtual serial port
assigned to the RFID reader.
