manualshive.com logo in svg

Proxim ORiNOCO AP-8000, User Manual, Page: 59 / 178

Share
Download
Proxim ORiNOCO AP-8000 User Manual Download Page 59

Using Web Interface to Manage the Access Point

AP-8000 User Guide

59

Web Interface Overview

To configure, manage and monitor the AP device using Web Interface, you must first log on to a Web Browser. See 

Logging in to the Web Interface

.

After successful logon to the Web Interface, the following Access Point home page appears.

Figure 6-1 Home Page

The left-pane of the Web Interface contains a tree structure of all the Configuration, Management and Monitor features of 
the Access Point.

The right-pane of the Web Interface provides a platform for the users to configure the features of the Access Point.

The Web Interface contains the following key buttons, namely: 

1.

Commit

: Commit button is used to apply the configuration changes into the device. When changes are made to the 

configuration parameters of the device, until the COMMIT button is clicked, the changes will not take effect. Some 
parameters may require system reboot for the changes to take effect. On clicking COMMIT, the system evaluates all 
the configuration dependencies and displays the configuration status. 
To commit the changes, click Commit in the Web Interface. The following screen appears.

Figure 6-2 Commit Confirmation Message

Summary of Contents for ORiNOCO AP-8000



















































































































































































Reviews:

No comments