Installation and Initialization
AP-8000 User Guide
22
Logging in to the Web Interface
Once the AP has a valid IP Address and an Ethernet connection, you can use your Web Browser to configure and
monitor the AP.
To configure and monitor the AP device using Web Browser, follow the following steps.
1. Open a Web Browser on a network computer.
2. If necessary, disable the browser’s Internet proxy settings. For Internet Explorer users, follow these steps:
–
Select
Tools > Internet Options
.
–
Click the
Connections
tab.
–
Click
LAN Settings
.
–
If necessary, remove the selection from
Use a
Proxy Server for your Lan
box.
–
Click
OK
twice to save your changes and return to Internet Explorer.
3. Enter the Access Point’s IP address in the browser’s
Address
field and press
Enter
or
Go
.
This is either the dynamic IP address assigned by a network DHCP server or the static IP address you manually
configured. See
for information on how to determine the unit’s IP address and manually configure a new IP
address, if necessary.
The
Access Point Login
screen appears.
Figure 2-7 Login
4. Enter the HTTP
User Name
and
Password
. The default username and password are “
admin
” and “
public
”. The user
name and password are case-sensitive.
5. After successful login the Home Page is automatically launched.By default, the Access Point is configured to the
default settings and with those settings you can manage your Access Point. You can change/modify the default
settings according to your network requirements.