ORiNOCO 11a/b/g PCI Card:
Antenna Installation
© 2003 Proxim Corporation
66179/A
5 Attach the second mounting bracket to
the base.
• The two mounting brackets should line up: the
long arm of one mounting bracket should align
with the hole on the other bracket.
• The Antenna's four knobs (two on each side)
should fit into the grooves of the two mounting
bracket.
• Using a small screwdriver, secure the mounting
brackets into place with the two small screws.
6 Insert the mounting bracket covers over
the mounting brackets.
Mounting bracket cover
7 Place the antenna in the upright position.
8 Wall mount the antenna (optional).
• Two wall mounting screws and anchors are included.
• Screw the two wall mounting screws into the
desired wall with a horizontal pitch of 46mm.
• Depending on the wall’s structure, you may
need to first drill holes and use the wall
anchors to secure the screws in place.
• Leave a gap of approximately 1mm between
the wall and the head of each screw.
• Place the unit over the screws using the key
holes in the underside of the antenna base.
• Insert the screws into the underside of the unit
and lock in place.
• After mounting the antenna base, place the
antenna in the upright position for best results.
1mm
gap
