background image

4-5

 

Action Menu 

 

The Action menu allows for enabling and disabling both the wireless radio and/or system tray 

icon.  

 

 

Figure 4-15 

 

4-5-1 Enable/Disable Radio  

There may be situations when the user wants to disable the PROXIM WLAN 802.11b/g  

device’s  radio, so that the wireless device cannot send or receive any wireless traffic.  If a user is 

in an environment where there are no wireless networks, the user may turn off the radio in order 

to minimize power consumption of the PROXIM WLAN 802.11b/g  device.  

 

In the ACTION menu of the ACU there is an Enable Radio/Disable Radio selection.  The choice 

provided in the menu will toggle the current state of the radio.   

 

Enable Radio: 

The Radio is currently OFF (Disabled), and the “Enable Radio” 

selection will turn ON the Radio of the wireless device. 

 

 

Disable Radio:

 

The Radio is currently ON (Enabled), and the “Disable  Radio” 

selection will turn OFF the Radio of the wireless device

 

 

The PROXIM WLAN 802.11b/g  device radio also ma y be disabled through an external button 

located on your platform, please review your platform user’s guide for additional information about 

the wireless enable/disable button 

 

4-5-2 Enable/Disable Tray Icon 

In the ACTION menu of the ACU there is an Enable  Tray Icon/Disable tray Icon selection.  The 

choice provided in the menu will toggle the current state of the System tray Icon.  

 

Disable Tray Icon: 

This will remove the tray icon from you system tray.  The system 

tray icon appears in the system tray again after system is restarted or if the Atheros 

Client utility is opened again through Start\Programs \Atheros\ACU. 

 

Enable Tray Icon: 

 

This will allow for the system tray icon to once again be placed in 

the system tray. 

Summary of Contents for G11FNW-PC

































Reviews: