10.0: Final Preparations
Requires following bags:
22:
7,4v 3500mAh LiPo Battery
23:
Transmitter
25:
7,4v LiPo Balance Charger
26:
62054 Wheels Complete
Chassis
10.1: From bag 26, open the smaller bag inside containing wheels. On the inside of the rim you will
see a hexagonal cutout with a circular hole, that fits perfectly on the Wheel Hex on your model. Slot
the wheels into place so that they register on the Wheel Hex –notice pattern on wheels indicates
direction; arrow-like shape should face to the front, then fasten with Hex Nuts. Take care to not
make the nuts too tight, as this may damage the plastic rims and cause them to break during high-
stress driving. The wheels should be secure with minimum wobble, but large amounts of force should
not be applied while fastening.
10.2: The battery in bag 22 is partially charged so initial adjustments of the car is possible right away,
but we advise charging the battery fully using the charger from bag 25 first. Notice that the charger
will indicate cell 1 and 2 connected on the battery included, and both cells will flash green when the
battery if fully charged. Do NOT charge the battery using equipment not specifically for charging of
LiPo batteries, as this could pose a serious hazard. If the battery shows any sign of physical damage,
consult an experienced user before considering using the battery. Read online about safe usage and
storage of LiPo batteries.
