Make your outdoors great with other project plans available at www.ProWoodLumber.com
Page 2 of 10
Cut Wood to Size
Caution: Always wear gloves, a dust mask and eye protection
when sawing, sanding or machining wood. Always use a circular,
miter saw or table saw on a clean, flat and level surface.
We recommend only cutting lumber for each sections as you
assemble. To save on material, measure and cut previously cut
lumber rather than continually cutting from a new board. Lumber
has both nominal and actual dimensions, meaning your 2"x 2" post
or 1" x 6" board may actually be a slightly different size.
General Assembly Tips
• Establish a screw pattern to enhance the overall look and feel
of the final assembled product.
• Pre-drill all screw holes with a drill bit to ease screw
insertion and prevent wood splitting.
• Countersink all screws so the head of a countersunk screw,
when placed in the hole, will sit flush with the surface of the
surrounding material.
Item No.
Name
Qty.
Description
A
Frame - Side Rails
4
1-1/2" x 1-1/2" x 28"
B
Frame - Vertical Support Rails
16
1-1/2" x 1-1/2" x 20"
C
Side Board
8
3/4" x 5-1/2" x 29-1/2"
D
Frame - Front/Back Top Rails
4
1-1/2" x 1-1/2" x 48"
E
Front/Back Board
7
3/4" x 5-1/2"x 50"
F
Hinge Detail Board
1
3/4" x 4-3/4" x 50"
G
Floor Board
4
3/4" x 5-1/2" x 48"
H
Frame - Cross Support Rails
10
1-1/2" x 1-1/2" x 25"
I
Frame - Top Outer Rails
2
1-1/2" x 1-1/2" x 51"
J
Top Board
5
3/4" x 5-1/2" x 52-1/2"
K
Continuous Hinge
1
Continuous Hinge - 48"
L
55 gal Tote
1
55 Gallon Tote
M
Fastener
-
Exterior Wood Screw - 2"
N
Fastener
-
Exterior Wood Screw 2-1/2"
O
Chain
1
24"
K
C
B
A
D
E
H
I
G
F
J
L