ProWood Outdoor Storage Box Project Plan Download Page 1

Make your outdoors great with other project plans available at www.ProWoodLumber.com  

Page 1 of 10

ProWood

®

 Project Plan

outdoor storage box

Purchased Materials:

•  (13) 2"x 2"x 8' ProWood

®

 ground-contact  

  rated lumber
•  (9) 1"x 6"x 12' ProWood

® 

 ground-contact  

  rated lumber

•  (1) Box of #8 x 2" exterior wood  

 

 screws 
•  (1) Box of #8 x 2-1/2" exterior wood    
 screws 
•  (1) 48" Continuous Hinge 
 
Optional: 
•  (1) 55 Gallon Tote (for weatherproofing) 
•  (1) 24"chain/rope (for box lid) 
•  Water sealer 
•  Exterior stain, black (for interior frame)

If your wood project touches or comes near the ground, use pressure-treated 

lumber that is rated for ground contact to ensure long-term performance.

Basic Tools:

•  Tape measure
•  Carpenter’s square

 

•  Circular or table saw

 

•  3/16" drill bit (for pre-drilling)

 

•  Power drill with screw driving bit

Optional: 
•  Impact driver 
•  Sander or sandpaper (for removing ink stamps on lumber) 
•  Pocket hole jig (for predrilling interior frame) 
•  Orbital sander, planer or table router (for beveled board    
 edges)

Summary of Contents for Outdoor Storage Box











Reviews: