3. Installation
A Prowise certified mechanic will install the Prowise Touchscreen on delivery and will ensure the screen is ready
for use. We do not recommend it, but if you or someone else wants to install the screen, then please follow the
steps below:
●
Do not install the touchscreen alone.
●
Use a certified Prowise wall bracket to install the Prowise Touchscreen on a wall.
●
Use a Prowise VESA bracket when assembling the screen on a Prowise lift system.
●
Please ensure the wall is strong enough to carry the weight of the touchscreen.
●
Connect the cables (which cables you require depend on the external devices you use or other external
sources like a lift system).
●
If you are using an OPS PC module, ensure the module is inserted and locked correctly. Install the PC
module as described in the chapter ‘Install OPS PC module’.
●
Make sure to only connect the power cable when the above elements have been connected and only
use the power cable supplied by Prowise.
CAUTION!
Prowise can not be held responsible for any damage or injury caused by the incorrect installation
of the touchscreen done by third parties. Damage to the touchscreen, caused by incorrect installation by
third parties is not covered by the warranty. Always contact Prowise or a certified partner if you have any
questions about the installation.
3.1. Place of installation
Please follow the instructions below, these will help guarantee reliable functioning and a long lifespan of your
touchscreen.
Keep the touchscreen and all connected devices away from water and avoid dust and heat. Do not place the
touchscreen near devices which produce heat or in the vicinity of water. Non-compliance with these instructions
can lead to faults or damage to the touchscreen.
The Prowise Touchscreen can be used at an ambient temperature from 0 °C to +38 °C (32 °F to 100,4 °F) and
relative humidity from 10% to 90% (without condensation).
www.prowise.com
7 / 53
