Put the basebox upright and connect it to the
net with the power cord. Place the actuator in
the highest position by using the lift control.
1
2
Assembly instructions
Put the chassis and basebox upside down.
Assemble the adjustable pillars to the chassis
(4 M6x20 bolts per pillar).
4 x M6x20
4 x M6x20
4 mm
Push the hinge pins, from the outsides, partially
in the hinges. Please note: the serrated edge of
the pins must be on the outside. Subsequently,
place the VESA bracket into the hinges.
3
3 mm
Push the hinge pins carefully through, then
completely hammer them by using a pin punch.
4
1 x pin
1 x pin
4
