PW-MN427_34I
150Mbps Wireless N USB Module User Guide
- 11 -
Figure 3-4
Step 8.
In the prompt page shown below, select
Use the Following IP Address
, and set the IP
and Subnet mask. After completing setting, click
OK
.
Note:
Figure 3-5
Please set the IP address in different network segment with the other network card to avoid
conflict.
Step 9.
Launch RL52 Wireless N Client Utility, then highlight the Network Name (SSID)
beginning with “PSP” in the “Network” page, and click
Connect
.
Step 10.
Check whether your PSP device is detected in the Diagnostics mode of Kai as Figure
5-6 shown: Click the icon
first and then click the folder
.
