PW-MN421
Wireless Lite-N USB Module
3
Chapter 2 Installation Guide
2.1 Hardware
Installation
PW-MN427_56I has a 4-Pin onboard connector to transmit USB signal, and it is mainly
designed to provide stability wireless function and performance for your system.
For installation, you must be sure to connect this module to your device or system’s compatible
connector, sometimes you should use a connecting wire first. Then, the promoted Found New
Hardware Wizard will pop up if the Module is installed correctly.
2.2 Software
Installation
Windows XP, Vista, 7 are supported. This user guide takes Windows XP for example.
1. Please run the
Setup
program of the module. Then you will see Figure 2-1.