M-WN823N
Wireless N USB Adapter User Guide
21
Step 3:
Click
Remove
.
Figure 3-7
3.2.3 Duplicate a configuration file
Follow the steps below to change the name of a configuration profile.
Step 1:
Go to the Profile tab (shown in Figure 3-7).
Step 2:
Select the profile name in the Profiles List.
Step 3:
Click
Duplicate
, and then enter the new name for the configuration profile.
3.2.4 Set default configuration profile
Follow the steps below to select a configuration profile as default. Once the adapter wants to
connect a wireless network, it will select the default profile to connect firstly.
Step 1:
Go to the Profile tab (shown in Figure 3-7).
Step 2:
Select the profile name in the Profiles List.
Step 3:
Click
Set Default
.
3.3 Available Network
Click the tab
Profile
as shown in Figure 3-8 to view the wireless networks. You can follow the
steps below to accede to a specific network.
