Chapter Installing the LCD TV
METHOD A:
Use a
n
antenna cable to connect the NTSC signal to the LCD TV’s TV CABLE
terminal.
METHOD B:
Use
an
antenna cable to connect the ATSC signal to the LCD TV’s
HDTV AIR terminal.
Connect the AC power cord at the back of the TV and connect the power cord to wall
outlet.
Press the button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the power outlet when the LCD TV will
not be used for a long period of time.
The button on the front panel is only used for switching the LCD TV into
standby, it does not disconnect the device from the main voltage. To
completely disconnect the main voltage, please remove the power plug from
the socket.
Press the
SOURCE
button on the remote to
display the
Source
List. Use the
▲▼
buttons to
select
TV
( METHOD A), or
HDTV
(METHOD
B), and press the
OK
button.
TV
CABLE
HDTV
AIR
VHF/UHF IN
A
B
Main:
TV(CABLE/AIR)
HDTV (CABLE/AIR)
VIDEO (SIDE)
VIDEO (REAR)
VIDEO (S-VIDEO)
VIDEO (YPbPr)
VIDEO (YPbPr)
VIDEO (HDMI)
VIDEO (HDMI)
COMPUTER (VGA)
TV
CABLE
HDTV
AIR
VHF/UHF IN
