Pro Video Instruments
Copyright 2017 ProVideoInstruments USA – All Rights Are Reserved
STREAM CONNECT
Each Module exports its data or information such as video from a HDMI card to
Stream connect. From here we then tell where we would like the information to go
too. This goes in the form of Connector 1-6 which is another name for Modules 1-6
So we can take the exported video from Module 1 which would be a HDMI card and
export it to GEN1- SPTS – which would be Data 1 port on the front for IP Streaming.
Example below of moving from the input side – LEFT – to the Output side – RIGHT-
When the output program is selected we can click on the name to modify its
properties for IP Multicast address if using IP out, VCT, Program information, etc
