background image

Never open the case to modify or take apart the product.

No user serviceable parts inside. Contact the store you purchased or authorized 

distributor in your area if you have trouble with your apparatus. 

Be sure to use the proper AC Adapter depending on the voltage system in your 

country/area. Refer to the product manual for specific required voltage and 
current draw information. Never unplug or plug the AC adapter when your 
hands are wet.

Do not excessively bend the power cord or leave heavy objects on top of it. 

Damaging the power cable could cause fire, electronic shock, and / or short 
circuit.

In the following circumstances, turn off the apparatus and unplug the AC 

Adapter immediately, and contact the store the item was purchased at or 
authorized distributor in your area to place a repair order.

The power supply cord or the plug is damaged.

Liquid is has been spilled or objects have fallen into the apparatus.

The apparatus has been exposed to rain or extreme moisture.

The apparatus does not operate normally or changes in performance happens 

in a significant way.

Do not use or keep the apparatus in the following places.

Places where there is excessive heat such as radiators, heat registers, stoves, 

or other apparatus that produce extreme heat.

Places the apparatus is exposed to direct sunlight. 

Places near water or high humidity such as a bathtub, washstand, wet floor, etc.

Places surrounded by dust.

Places that will vibrate the apparatus a lot. 

Safety Information

Warning:

Warning:

Caution: 

Please be sure to read this manual and follow the instruction before 

using this product in order to insure safe operation of the product.

This symbol indicates an item that can result in 

death or serious personal injury if ignored. 

This symbol indicates an item that can result in 

serious personal injury or material damage if 

ignored.

The following precaution symbols alert you and others to the risk of personal 

and material injury that may be caused if the precaution is ignored.

Summary of Contents for STV-1JB

















Reviews: