4
General
•
Electrical devices are not toys. Keep the product away from children.
•
Only use the product as intended and for purposes described in the manual.
•
After opening the package, examine all parts for visible damage. If you have found any damage,
please contact the company you purchased this unit from.
•
Power-off and stop using the device immediately, if the unit is smoking or is showing any abnormal
behaviour.
•
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they are supervised or have been
instructed on how to use the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
•
Installing the device, maintenance and repair work may only be carried out by qualified personnel
who are familiar with the risks involved, the relevant regulations and with the guidelines and safety
precautions to be applied.
•
Do not disassemble the device - the internal circuitry may contain hazardous voltages. Attempting to
service the unit yourself may result in electric shock or fire and will void the unit warranty.
•
Always keep metal objects or other materials that can short circuit the terminals of the battery or the
device securely away. A resulting spark or short-circuit may not only damage the device, but also
cause an explosion and potentially produce a current high enough to weld a ring or the like to metal.
Remove personal metal items such as rings, bracelets, necklaces, and watches when working on the
device or the battery.
•
Operate the device only, if all cables and the housing are undamaged and all connections are tight
and clean. Loose or dirty connections could result in overheating, electrical sparks and fire.
•
Ensure the device is standing firmly. The device must be set up and fastened in such a way that it
cannot tip over or fall down.
Environment
•
Only use the product in environments from -20°C ~ 65°C (20%-85% Relative Humidity).
•
Do not operate the product in damp, wet or dusty environments: Never expose the device to rain or
snow. Doing so may result in damage to the device or other equipment installed in the system or
result in electric shock or fire. Do not operate the unit in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust.
•
To avoid heat accumulation, do not cover the device. To prevent overheating , ensure that air inlets
and ventilation is not obstructed. Do not expose the device to a heat source (such as direct sunlight
or heating). Avoid additional heating of the device in this way.
Electrical Cables
•
If cables have to be fed through metal holes or other walls with sharp edges, use ducts or cable
bushings to prevent damage.
•
Do not lay cables which are loose or bent next to electrically conductive material (metal).
•
Do not pull on the cables.
•
Avoid to lay 230 V mains cable and 6V/12/24V DC cables in the same duct.
•
Prevent all cables from being stepped on, tripped over, or being damaged by e.g. sharp edges or hot
surfaces.
Summary of Contents for IBT1
Page 2: ...2...