- 3 Step igniting levels (Hot, Medium, Cold)
Strong ignition is required starting engine at cold weather and some
type of plugs. Pulse 1 is selectable ignition level and it makes sure
staring engine at any condition.
: 7.2 V (6 cells battery pack), 12 V battery
: 4 mA (Standby), 1.3 ~ 1.5 A (Ignition)
: 65 X 40 X 18 mm (2.56" X 1.57" X 0.71")
: Pulse 1 : 40.5 g (1.43 oz),
receptacle : 12.7 g (0.45oz)
: Pulse 1 X 1, receptacle X 1, 12V terminals X 2
Specification
Input voltage
Current drain
Size
Weight
Contents
Installation
- Pulse 1
a. Connect Pulse 1 with 7.2 V battery pack.
(Notice : For 12V battery, terminals are included in the package.)
- Receptacle Assembly
a. Make 13 mm (0.51") hole in fuselage.
b. Placed the DC jack on the hole and fixed with nut.
(Notice : applying Locktite
TM
on bolt and nut helps preventing
loosing by engine vibration)
c. Grounding black wire on the engine flange by fastening mounting
bolt.
d. Placed U spring of anode red wire on the top of glow plug and
press till placed it on the groove and sliding silicon tube till fixed
it.
sliding to fix
U spring
silicon tube
Operation
a. Plug in Pulse 1 to receptacle on fuselage.
(Warning : keep away pulse1 from the propeller for preventing
tangled with plug wire)
b. Pressing small button for selecting ignition level according to
temperature and kinds of plugs. (blue : cold, green : medium,
red : hot)
(Notice : hot ignition level is useful at cold weather and cold
type plug but this hot ignition can reduce lifespan of plug.
Is it possible, starting engine at cold or medium level.)
c. Ignition by pressing start button (blinking LED) and starting
engine.
start button
LED indicator
select button for
ignition level
to battery
( 7.2 - 12 V )
receptacle
2
3
locking
pressing
pressing
Front View
Tip! : U spring can be easily placed on the gloove by locking one
side of U spring then pressing another side as below.
