Protogate Freeway 3414, Hardware Maintenance Manual, Page: 29 / 72

2: Maintaining the Freeway Cabinet
DC 900-2031A 29
2.1.3 Shutdown Procedure (Freeway with SRA)
1. Log into the Freeway as described in the Freeway User Guide (DC 900-1333).
2. From the Freeway Main Menu choose 6 “Run FreeBSD Shell”.
3. At the shell prompt type “
shutdown -p now
”. The Freeway will power itself
down after several seconds. There is no need to use the power ON/OFF switch.
4. Unplug the power cord(s) from the rear of the Freeway cabinet if you plan to do
any hardware maintenance on the Freeway.
2.1.4 Startup Procedure
1. Plug the AC power cord into the power supply on the rear of the cabinet. For the
3414R, plug AC power cords into both power supplies to avoid sounding the
power alarm.
2. Turn on the switch at the bottom rear of each power supply.
3. Open the front access door and push and release the momentary power switch
shown in Figure 2–1 .
Figure 2–1: Freeway Power Switch (front)
System Reset Button
(System Reset 2, options)
Alarm Reset Button
Power On/Off Momentary Switch