PARTS:
INSTALLATION:
Inflate the punching bag using the inflation pump and
pump needle.
IMPORTANT: This punching bag is
constructed with an inner bladder
beneath the surface. When inflating
the punching bag, use care when
inserting the needle. Wet it first
and then insert it GENTLY into the
air hole taking care not to puncture the inner bladder.
Parts:
1. Punching ball
2. Air hole
3. Inflation pump
4. Pump needle
5. Spring
6. Rubber washer
7. Plastic cap
8. Suction cup base
9. Spring washer
10. Wall mount base
11. Screws
Desktop
1. Stick the suction cup base to a flat and clean surface
making sure it sticks.
2. Place the plastic cap over the base with the bolt through
the hole.
3. Place the rubber washer over the cap and bolt.
4. Screw the spring onto the bolt.
5. Place the spring washer at the top of the spring and screw
the punching ball into the spring.
1
2
3
4
5
6
7
8
9
10
11
1
2
5
6
7
8
9
