PARTS INCLUDED:
SET UP:
CLEANING:
Wipe the Disco Potty with a damp cloth and cleaner.
Do not submerge in water.
1. Install 3 x ‘AAA’ batteries into the battery compartment.
2. Bend the arm to fit the rim of the toilet bowl. The arm and bulb
go on the inside of the bowl. The set button and sensor go on
the outside (Fig. 1). The sensor works best when facing the
bathroom’s entrance.
3. The light will only show in the dark. It is motion sensitive and
will stay on for 2 minutes after detecting movement.
4. The light cycles through colors. Press the set button to have
it stay on a desired color (Fig.2). Press again to have it
cycle through.
Arm
Set
Bulb
Battery Compartment
FIG. 1
FIG. 2
Motion Light/Sensor
