background image

SAFETY WARNINGS

  Read and follow instructions on how to synchronize electronics  

  before each flight.

  To prevent damage to people or property, always avoid contact with  

  other objects while in flight.

  Inspect aircraft prior to each flight and do not fly if damaged.

  Never expose product or any of its electronic parts to moisture, water,  

  or heat sources.

  To prevent overheating, allow battery a cool-down period  

  before recharging.

  To prolong engine life, allow a cool-down period between flights.

  Use only the charger and/or charging cable that is suplied with  

  this item.

  Do not strike, cut, or pierce the internal battery or subject it to  

  hard impacts.

  Do not mix old and new batteries or mix different types of batteries.

  Never attempte to modify function of vehicle or controller or attempt  

  repairs using parts other then those supplied by Protocol. Spare parts  
  are available at 

www.ProtocolNY.com

HAVE FUN, BUT SAFETY FIRST!

THIS DEVICE USES COMPONETS THAT OPERATE AT HIGH SPEEDS. 

AS WITH ANY SUCH DEVICE, USE CAUTION TO OPERATE SAFELY.

FAILURE TO FOLLOW ANY OF THESE GUIDELINES MAY RESULT IN BODILY 

INJURY OR DAMAGE TO PERSONAL OR PUBLIC PROPERTY.

1

Summary of Contents for AeroDrone
























Reviews: