Proto P10, User Manual

Page: 3 / 4

3
Edit Menu
To enter the Edit Menu, reset the board by pressing RESET three times (while the clock is not
counting down) and then immediately press edit. Then pushing the EDIT button will cycle
through the following options. The defaults are in brackets.
Edit Action
Team
Name Select the team names from a pre-configured list. Use the Timeout buttons for
each team to scroll through a selection of Team Name colours.
Pd 1
Period Timer Pre-set 1
. Adjust time with MAIN CLOCK ADJUST buttons (8 min)
Pd 2
Period Timer Pre-set 2
. Adjust time with MAIN CLOCK ADJUST buttons (5 min)
Pd 3 Period Timer Pre-set 3 . Adjust time with MAIN CLOCK ADJUST buttons (4 min)
Pd 4 Period Timer Pre-set 4 . Adjust time with MAIN CLOCK ADJUST buttons (7 min)
Pd 5 Period Timer Pre-set 5 . Adjust time with MAIN CLOCK ADJUST buttons (6 min)
In 1 Interval Timer Pre-set 1 . Adjust time with MAIN CLOCK ADJUST buttons (2 min)
In 2 Interval Timer Pre-set 2 . Adjust time with MAIN CLOCK ADJUST buttons (5 min)
In 3 Interval Timer Pre-set 3 . Adjust time with MAIN CLOCK ADJUST buttons (4 min)
In 4 Interval Timer Pre-set 4. Adjust time with MAIN CLOCK ADJUST buttons (3 min)
In 5 Interval Timer Pre-set 5. Adjust time with MAIN CLOCK ADJUST buttons (1 min)
T.O Time Adjust Time Out Timer (0 - 60 sec) with MAIN CLOCK ADJUST buttons (60 sec)
Brightness Adjust display brightness with HOME Score buttons (10% change) and AWAY
Score buttons (1% change)
Shot Time Adjust
Shotclock Timer
(0 - 30 sec) with MAIN CLOCK ADJUST buttons (30 sec)
12/24
Hour
Clock Display
– 12 / 24 hour. Use SCORE up/down to change (12)
Time Set The Time . Use the MAIN CLOCK ADJUST buttons to adjust.
Exit
Edit Team
Names Edit the list of team names
To edit team names, select “Edit Team Names” as above.
1. Press EDIT
2. Press number keys to select memory location to change (0 – 99)
3. Press BACK/CLEAR to shift cursor to beginning
4. Type new name using keypad (press same key several times to select required
character)
5. Press ENTER – this takes you back to step 1) so you can add next name
6. When finished adding names press ENTER twice to escape.
To select team names from the memorised list, press RESET 3 times. The first item that
appears will be Team Name. Use the score arrow buttons for each team to select name from
memory bank.
Maintenance
Clean digit covers with a soft cloth and water/detergent.
Contact Details
Proto Electronics Ltd
382 Montreal Street
PO Box 7577
Christchurch 8240
P: (03) 365 3366
E:
enquiries@proto.co.nz
W: www.proto.co.nz