Keypad
LED Display
Power Override
Hole
1. Shut the door and hold it closed all the way with one hand.
2. While holding the door shut, press # and the door will
automatically lock, the display will show “CLOSED”
then your personal code.
Note:
You have 10 minutes to press # and close the safe from
the time it was opened.
If you press # and the display shows “E-CODE”, it means
that the 10 minute period have passed. To close the safe
now, you must enter your personal code and press # (e.g. 1-2-3-4-#).
The door will lock; the display will show “CLOSED” then
your personal code.
1.
Open the safe with your personal code or factory code 1-2-3-4
2. Write your new 4 digit code on a piece of paper or memorize
it in your head
3. Shut the door, hold it closed, then enter that new 4 digit personal code.
4. The safe will automatically lock and retain your new code you
just entered. The display will show “CLOSE” “CLOSED”
and your new personal code.
5. Now you can test it by entering your new code. Just key-in
the new 4 digit code and safe will open.
1.
Open the safe using your personal code and leave it in
2. Enter the existing 6 digit master code (Factory code is: 8-8-8-8-8-8)
and press #. The LED display will show “NEU”.
3. Now enter a new 6 digit master code and press #
(LED display will show “AGAIN”)
Enter that 6 digit master code again for the second time and press #.
Step 2. – Closing the safe.
Step 3. – Changing your personal code.
Step 4. Changing the master code (Optional)
page 2
page 3
(continue next page)
(if it was never changed before).
the open position.
If the procedure was successful the display will show “DONED”.
This indicates that the new master code has been accepted.
If the display shows “E-CODE” please repeat all the steps in Step 4.
THE MASTER CODE OVERRIDES THE PERSONAL CODE
IN CASE IT WAS LOST OR FORGOTTEN.
Please use this key only if both codes (user and master) are not
available or if the keypad is malfunctioning.
DO NOT use this key to open the safe on a regular bases.
To use the key, gently unscrew the chrome keyhole cap located
below and left of the keypad. Insert the key with the notch
pointing upwards and turn counter-clockwise to open the safe.
NEVER LOCK THE KEYS INSIDE THE SAFE. ALWAYS KEEP
THE KEYS OUTSIDE OF THE SAFE IN A HIDDEN PLACE.
If the internal batteries of the safe die, you can always give power to
the lock from the outside by using the included battery override box.
1. Slide the battery box cover and install 4 AA batteries
2. Plug in the jack in the power override hole in the keypad
3. Now open the safe as you would by using your personal or master code
NEVER LOCK THE POWER OVERRIDE BOX INSIDE THE SAFE.
Using the Emergency override key:
Using the Power override battery box:
http://www.monomachines.com/
http://www.monomachines.com/
