Proteus EEC-7000, Owner'S Manual

Page: 3 / 8

- 2 -
STEP 4.
a. FIT HANDRAIL TO CONNECTING ARM ( 04 )
WITH BOLT ( 34 ), WASHER ( 42 ) & NUT
( 46 ). BE SURE TO TIGHTEN BOLT
FIRMLY THEN FIT HALF MOON CAPS ( 20 )
ON BOTH ENDS.
b. REPEAT SAME PROCEDURE ON
ASSEMBLING THE CONNECTING ARM ( 04 )
& PEDAL ARM ( 05 ).
c. REPEAT SAME PROCEDURE ON THE
OTHER SIDE.
( PLEASE REFER TO FIG. F )
STEP 3.
a. INSERT AXLE SPACER ( 13 ), WAVE WASHER
( 57 ) PIVOT CAP-A ( 14 ), THEN FIT
HANDRAIL ( 03 ) TO THE AXLE BY USING M8
MIDDLE WASHER ( 43 ) AND M8 BOLT ( 36 ).
( TIGHTEN THE BOLT FIRMLY ).
b. FIT ANOTHER PIVOT CAP-B ( 15 ) IN RIGHT
POSITION WITH SLIGHTPUSH ( NO SCREW ).
( PLEASE REFER TO FIG. D )
c. REPEAT SAME PROCEDURE ON THE OTHER
SIDE HANDRAIL ( 03 ).
( PLEASE REFER TO FIG. E )