F. PULSE
:
a.
Show the current heart rate in bpm (beats per minute). The range of pulse value is from 60 to
240 bpm.
b.
Press the ENTER button to the setting mode, then press UP or DOWN button to set the target
heart rate to be reached. The range of setting value is from 60 to 220 bpm. By setting the value
mode, the pulse window shows T.H.R.. Once your current heart rate is higher than your set
value, the monitor will glitter to inform you.
NOTE:
If no pulse signal input within 8 seconds, the pulse window display will indicate "P".
G. RPM
:
The monitor of RPM window will display the current RPM from 15 ~ 1200 RPM.
NOTE :
RPM can not be set.
H. ODO
:
The monitor of ODO (odometer) window will display the accumulate distance from 1 ~ 999 Km
or Mile.
NOTE :
ODO can not be set.
x 4
DO
WN
U
P
+
-
O
M
/
R
E
D
T
E
N
E
~
23
