Ref. CR 240 xx / CR 241 xx (xx - marking of working length)
?
occasion of use the fall arrest system, so that, in the case of a fall, there will be no collision with the
ground or other obstacle in the fall path. The required value of the free space should be taken from
instruction manual of used equipment.
?
there are many hazards that may affect the performance of the equipment and corresponding safety
precautions that have to be observed during equipment utilization, especially:- trailing or looping of
lanyards or lifelines over sharp edges,- any defects like cutting, abrasion, corrosion, - climatic
exposure,- pendulum falls,- extremes of temperature,- chemical reagents,- electrical conductivity.
?
personal protective equipment must be transported in the package (e.g.: bag made of moisture-proof
textile or foil bag or cases made of steel or plastic) to protect it against damage or moisture.
?
the equipment can be cleaned without causing adverse effect on the materials in the manufacture of
the equipment. For textile products use mild detergents for delicate fabrics, wash by hand or in a
machine and rinse in water. Plastic parts can be cleaned only with water. When the equipment
becomes wet, either from being in use or when due cleaning, it shall be allowed to dry naturally, and
shall be kept away from direct heat. In metallic products some mechanic parts (spring, pin, hinge,
etc.) can be regularly slightly lubricated to ensure better operation.
Other maintenance and cleaning procedures should be adhered to detailed instructions stated in the
manual of the equipment.
?
personal protective equipment should be stored loosely packed, in a well-ventilated place, protected
from direct light, ultraviolet degradation, damp environment, sharp edges, extreme temperatures and
corrosive or aggressive substances.
it is obligatory to verify the free space required beneath the user at the workplace before each
IDENTITY CARD
SERIAL NUMBER
USER NAME
DATE OF MANUF.
DATE OF FIRST USE
DATE OF PURCHASE
MODEL AND TYPE OF EQUIPMENT
REF. NUMBER
PERIODIC EXAMINATION AND REPAIR HISTORY
1
2
DATE
REASON FOR
SERVICING/REPAIR
3
4
5
CONDITION OF DEVICE
AFTER SERVICING
NAME AND SIGNATURE
OF COMPETENT PERSON
NEXT
EXAMINATION
DATE
Instruction Manual
RETRACTABLE TYPE FALL ARRESTER
Read carefully
the manual
before use
the equipment
RETRACTABLE TYPE
FALL ARRESTER
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN THE DETAILS REQUIRED.
THE IDENTITY CARD SHOULD BE FILLED IN ONLY BY A COMPETENT PERSON RESPONSIBLE FOR PROTECTIVE EQUIPMENT. THE
IDENTITY CARD SHOULD BE FILLED IN BEFORE THE FIRST USE OF THE EQUIPMENT. ANY INFORMATION ABOUT THE EQUIPMENT LIKE:
PERIODIC INSPECTIONS, REPAIRS, REASONS OF EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED. THE IDENTITY CARD
SHOULD BE STORAGED DURING A WHOLE PERIOD OF EQUIPMENT UTILIZATION. DO NOT USE THE EQUIPMENT WITHOUT THE
IDENTITY CARD.
The retractable-type fall arrester device
CR 240 / CR 241 is a component of the
personal protective equipment against falls from
a height and conforms to EN 360:2002.
The fall arrester CR 240 / CR 241 is the
protection for one person only.
Maximum Working Load: 140 kg.
Available lengths of the device:
- Ref. CR 240 06 / CR 241 06 - 6 metres
- Ref. CR 240 10 / CR 241 10 - 10 metres
- Ref. CR 240 12 / CR 241 12 - 12 metres
- Ref. CR 240 15 / CR 241 15 - 15 metres
ESSENTIAL FEATURES
type of the equipment
Reference number of the device
including the working length of the device
cable length
serial number of the device
month and year of manufacture
device manufacturer or distributor
MARKING OF THE FALL ARRESTER
Reference No.:
Cable length:
Serial number:
Date of manufacture:
CR 240
xx
xx
m
0000001
MM.YYYY
before use
read the manual
maximum
working
load
store the device in
a protected place
Inspect
the device
before each
use
check locking
before each
use
maximal admissible
deflection of the cable
from the vertical line
use only a full body
harness conformed
to EN 361
don't realese rapidly
unwinded cable
don't repair
the device
yourself
don't use the device
with damaged
cable
Number and year
of the European Standard
CE mark and number of notified body
inspecting the equipment production
according to the article 11
of Directive 89/686/EEC
month and year of the manufacturer's
next inspection
Don't use the device after this date
Attention: Before the first use
mark the date of the first inspection
(date of first use +12 months,
e.g. first use 01.2012 - mark inspection 01.2013)
140 kg
Working cable ø4mm
made of galvanized
steel
Top connecting
swivel link
for attaching
the device
to the anchorage
point
Snap hook with swivel function
(Range of alternative hooks
with fall indicator as an option)
Identity label
Cable retractor
with brake
and energy dissipating
mechanism
inside plastic casing
Carrying handle
for transporting
the device
Attach the device
to the anchorage
point using the top
swivel link
Don’t use the carrying
handle for attaching
the device to
the anchorage point
2012
2013
range
of operating
temperatures
PROTEKT, 93-403 LODZ,
ul. Starorudzka 9, POLAND,
TEL: (48 42) 680 20 83, FAX: (48 42) 680 20 93
www.protekt.com.pl
Notified body, at which the European certification
was performed and which supervises
the production of the equipment:
APAVE SUDEUROPE SAS - BP 193 - 13322 MARSEILLE CEDEX 16 - FRANCE
No. 0082
RETRACTABLE TYPE
FALL ARRESTER
Reference No.:
Cable length:
Serial number:
Date of manufacture:
CR 240
xx
xx
m
0000001
MM.YYYY
RETRACTABLE TYPE
FALL ARRESTER
Reference No.:
Cable length:
Serial number:
Date of manufacture:
CR 240
xx
xx
m
0000001
MM.YYYY
Top connecting
connector with swivel
function
for attaching the device
to the anchorage point
the device allowed to
horizontal usage and
against falls over the edge
+ AZ 800
}
CR 240
CR 241
