background image

!

personal protective equipment shall only be used by a person trained and competent in its safe use.

!

personal protective equipment must not be used by a person with medical condition that could affect the safety of the 
equipment user in normal and emergency use.

!

a rescue plan shall be in place to deal with any emergencies that could arise during the work.

!

it is forbidden to make any alterations or additions to the equipment without the manufacturer's prior written consent.

!

any repair shall only be carried out by equipment manufacturer or his certified representative.

!

personal protective equipment shall not be used outside its limitations, or for any purpose other than that for which it is 
intended.

!

personal protective equipment should be a personal issue item.

!

before use ensure about the compatibility of items of equipment assembled into a fall arrest system. Periodically check 
connecting and adjusting of the equipment components to avoid accidental loosening or disconnecting of the components.

!

it is forbidden to use combinations of items of equipment in which the safe function of any one item is affected by or interferes 
with the safe function of another.

!

before each use of personal protective equipment it is obligatory to carry out a pre-use check of the equipment, to ensure that 
it is in a serviceable condition and operates correctly before it is used.

THE ESSENTIAL PRINCIPLES FOR USERS OF PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT

2

1.  Attach the energy 

absorber's connector to a 
frontal or dorsal 
attachment point of full 
body harness (conformed 
to EN 361) - [1]

2.  Connect the lanyard's 

connector   to the 
structural anchor point of 
resistance min. 12 kN 
(conformed to EN 795) 
placed above the user:

-  directly [2] 
-  with a additional 

connector [3], [4]

The shape of the structural 
anchor point shall not let self-
acting disconection of the 
device.
WARNING:   
During use the energy 
absorber with double lanyard 
(ABM/LB102, ABM/LB122, 
ABM/2LB100, ABM/2LE101, 
ABM-2T) it is strictly forbidden 
to attach the one  lanyard's 
connector  to harness 
attachment element and the 
second lanyard's connector to 
structural anchor point [5].

!
!

1

W

ARNING !

N

EC

ES

S

A

R

IL

Y

 

P

R

O

TE

C

THE 

SNAP 

HOOK 

G

A

TE 

WITH THE L

OCKING GEAR

3

4

ASSEMBLING A FALL ARREST SYSTEM

- The user should minimise the amount of slack in the lanyard near a fall hazard. 
- The user must rule out any risk of the situation (e.g. wrapping the lanyard around neck) that during use ar arresting a fall the lanyard may 

be used choke hitched.

- The user should avoid interleaving the lanyard between construction elements or the situation when there is a risk of falling over the 

sharp edge (e.g. roof edge).

0

0

- The energy absorber with lanyard can be used in temperatures from -30 C to 50 C. 
- Two separate lanyards each with an energy absorber should not be used side by side (i.e. parallel).
- The free lanyard of a double  (twin tail) lanyard combined with energy absorber should not be clipped back on the harness.

!

during pre-use check it is necessary to inspect all elements of the equipment in respect of any damages, excessive wear, 
corrosion, abrasion, cutting or incorrect acting, especially take into consideration:

- in full body harnesses and belts - buckles, adjusting elements, attaching points, webbings, seams, loops;
- in energy absorbers - attaching loops, webbing, seams, casing, connectors; 
- in textile lanyards or lifelines or guidelines - rope, loops, thimbles, connectors, adjusting element, splices;
- in steel lanyards or lifelines or guidelines - cable, wires, clips, ferrules, loops, thimbles, connectors, adjusting elements;
- in retractable fall arresters - cable or webbing, retractor and brake proper acting, casing, energy absorber, connector;
- in guided type fall arresters - body of the fall arrester, sliding function, locking gear acting, rivets and screws, connector, 

energy absorber;

- in connectors - main body, rivets, gate, locking gear acting.

!

after every12 months of utilization, personal protective equipment must be withdrawn from use to carry out periodical detailed 
inspection. The periodic inspection must be carried out by a competent person for periodic inspection. The periodic inspection 
can be carried out also by the manufacturer or his authorized representative. 

In case of some types of the complex equipment e.g. some types of retractable fall arresters the annual inspection can be 
carried out only by the manufacturer or his authorized representative. 

!

regular periodic inspections are the essential for equipment maintenance and the safety of the users which depends upon the 
continued efficiency and durability of the equipment.

!

during periodic inspection it is necessary to check the legibility of the equipment marking. 

!

it is essential for the safety of the user that if the product is re-sold outside the original country of destination the reseller shall 
provide instructions for use, for maintenance, for periodic examination and for repair in language of the country in which the 
product is to be used.

!

personal protective equipment must be withdrawn from use immediately when any doubt arise about its condition for safe use 
and not used again until confirmed in writing by equipment manufacturer or his representative after carried out the detailed 
inspection.

!

personal protective equipment must be withdrawn from use immediately and destroyed when it have been used to arrest a fall.

,

!

a full body harness is the only acceptable body holding device that can be used  in a fall arrest system.

!

in full body harness use only attaching points marked with big letter "A" to attach a fall arrest system. 

!

the anchor device or anchor point for the fall arrest system should always be positioned, and the work carried out in such a 
way, as to minimise both the potential for falls and potential fall distance. The anchor device/point should be placed above 
the position of the user . The shape and construction of  the anchor device/point shall not allowed to self-acting disconnection 
of the equipment. Minimal static strength of the anchor device/point is 12 kN. It is recommended to use certified and marked 
structural anchor point complied with EN795.

!

it is obligatory to verify the free space required beneath the user at the workplace before each occasion of use the fall arrest 
system, so that, in the case of a fall, there will be no collision with the ground or other obstacle in the fall path. The required 
value of the free space should be taken from instruction manual of used equipment.

!

there are many hazards that may affect the performance of the equipment and corresponding safety precautions that have to 
be observed during equipment utilization, especially:

- trailing or looping of lanyards or lifelines over sharp edges,
- any defects like cutting, abrasion, corrosion,
- climatic exposure,
- pendulum falls,
- extremes of temperature,
- chemical reagents,
- electrical conductivity.

!

personal protective equipment must be transported in the package (e.g.: bag made of moisture-proof textile or foil bag or 
cases made of steel or plastic) to protect it against damage or moisture.

!

the equipment can be cleaned without causing adverse effect on the materials in the manufacture of the equipment. For textile 
products use mild detergents for delicate fabrics, wash by hand or in a machine and rinse in water. Plastic parts can be 
cleaned only with water. When the equipment becomes wet, either from being in use or when due cleaning, it shall be allowed 
to dry naturally, and shall be kept away from direct heat. In metallic products some mechanic parts (spring, pin, hinge, etc.) 
can be regularly slightly lubricated to ensure better operation. 
Other maintenance and cleaning procedures should be adhered to detailed instructions stated in the manual of the equipment.

!

personal protective equipment should be stored loosely packed, in a well-ventilated place, protected from direct light, 
ultraviolet degradation, damp environment, sharp edges, extreme temperatures and corrosive or aggressive substances.

!

using the energy absorber in connection with fall arrest system must be compatible with use instructions of the fall arrest 
systems and obligatory standards:

- EN 361 - for   safety harnesses
- EN 362 - for connectors
- EN 795 - for anchorages
- EN 354 - for lanyards

CAUTION

FORBIDDEN!

5

Reviews: