•
RISK OF ELECTRIC SHOCK – Use only in dry locations and only
indoors.
•
DO NOT plug into another relocatable power tap.
•
DO NOT “daisy chain” surge protectors.
•
DO NOT plug into 220V outlet or power source.
•
DO NOT use with any aquarium equipment.
•
DO NOT connect to an ungrounded outlet.
•
DO NOT install this device if there is not at least 30 feet (10 meters),
or more of wire between the electrical outlet and electrical service
panel.
•
This device features internal protection that will disconnect the
surge protective component at the end of its useful life
(PROTECTED LED WILL TURN OFF) , but will maintain power to the
outlet – WHICH WILL BE UNPROTECTED. If you don’t want your
equipment at risk, follow the manufacturer’s instructions for replac-
ing the device.
•
DO NOT use in any circumstance that would affect the operation or
reliability of life support equipment, any medical applications, or
patient care.
SAFETY INFORMATION
TECHNICAL SPECIFICATIONS
Number of AC Outlets
8
Number of USB Ports
2—5V total 2.4A
AC Outlets
All 8 filtered with surge protection
Protection Modes
L-N, L-G, N-G, Surge
Thermal Fuse
Yes
Maximum Current
15 Amps
Line Voltage
120V @ 60Hz
Certification
UL 1449, UL 1363, FCC, ICES
Max Energy Dissipation
2160 Joules
Max Spike Voltage / Current
6,000V / 144,000A
Response Time
1 Nanosecond
Filtration
EMI / RFI G1: 40dB G2: 58dB
Over/Under Voltage Protection
Over 135Vac / Under 95Vac
ELAC AMERICAS INC.
1938 N. BATAVIA ST. SUITE K
ORANGE, CA 92865
Copyright 2021 ELAC Americas Inc.
CAUTIONS!
This surge protector is designed to protect your electronic equipment from AC power surges up to its rated specifications only. If an electrical
surge above the rated specifications of this surge protector enter this device, connected devices may not be protected. Please understand that
electrical surges can enter electronics devices through any interconnected conductive connections. These interconnections can include coax
lines, phone lines, ethernet lines, AV connections and any other conductive material.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
To assure continued FCC compliance:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.
FCC ID & IC Statements
To assure continued FCC compliance:
1. Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.
2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator & your body.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the
device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator and your body.
