ProTek R/C P-8 Instructions Download Page 3

Page: 3 / 4

STEP 3

Assembly of Storage Drawers

3A)

Remove Medium Drawer and place on flat surface. Pre-bend all hinge

surfaces for easier assembly.

Note: Velcro gap on left side panel should be larger on top than on the

bottom.

3B)

Remove covering from double-sided tape, fold side panel up, and tuck

small flap inside end panel. Secure to end panel with double-sided tape.

3C)

Repeat with opposite side.

3D)

Once both sides have been completed, remove covering from double-sided

tape on the back panel, and place the end cap over the top to ensure to cover

the flaps from the side panel and end panel. Repeat for the front of the drawer.

3E)

Repeat for all drawers.

Summary of Contents for P-8

Page 2: ...de panel should be larger on top than on the bottom 2B Fold both sides up towards the center 2C Fold end up and over flaps from the sides Push tab into the slot on bottom of the tool caddy Repeat for opposite side 2D Completed tool caddy 2E Secure velcro for pre installed tool holder and place tool caddy in top of hauler bag ...

Page 4: ...workmanship for three 3 months after original purchase date Warranty will not cover items that have been modified disassembled or otherwise misused according to the item s instructions Proof of purchase is required for to submit a warranty claim ProTek R C isnot responsible for bodily injury and or property damage that may occur from the use of or caused by this item ...