4G Modem Card
Manual APN
1. A Must filled setting
2. String format
: any
text
Enter the APN you want to use to establish the connection.
This is a must-filled setting if you selected Manual APN as APN
scheme.
Username
1. An Optional setting
2. String format
: any
text
Enter the optional username settings if your ISP provided such
settings to you.
Password
1. An Optional setting
2. String format
: any
text
Enter the optional Password settings if your ISP provided such
settings to you.
Authentication
1. A Must filled setting
2. By default Auto is
selected
Select PAP (Password Authentication Protocol) and use such protocol
to be authenticated with the carrier’s server.
Select CHAP (Challenge Handshake Authentication Protocol) and use
such protocol to be authenticated with the carrier’s server.
When Auto is selected, it means it will authenticate with the server
either PAP or CHAP.
IP Mode
1. A Must filled setting
2. By default Dynamic
IP is selected
Dynamic IP
The unit will get IP from cellular service..
Static IP
The unit will set IP according
Static IP Config
.
IP Type
1. A Must filled setting
2. By default IPv4 is
selected
Specify the IP type of the network service provided by your 3G/4G
network. It can be IPv4, IPv6, or IPv4v6.
PIN Code
1. An Optional setting
2. String format
:
interger
Enter the PIN (Personal Identification Number) code if it needs to
unlock your SIM card.
MTU Setup
1. An Optional setting
2. Uncheck by default
Check the Enable box to enable the MTU (Maximum Transmission
Unit) limit, and specify the MTU for the 3G/4G connection.
MTU refers to Maximum Transmission Unit. It specifies the largest
packet size permitted for Internet transmission.
Value Range
: 68 ~ 1500.
Keep Alive
1. An optional setting
2. Box is unchecked by
default
Check the Enable box to activate the keepalive function.
Input IP Address and interval to send an ICMP packet to check the
network status.
!
17
